N. Catalan Lasheras et al., “Measuring and aligning accelerator components to the nanometre scale”,IPAC 2014, Dresden, Germany, June 2014

M. Modena et al., “Status of PACMAN project at CERN”, 14th International Conference and Exhibition EUSPEN 2014, Dubrovnik, Croatia, June 2014

S. Zorzetti et al., “CLIC BPM quadrupole pre-alignment in the frame of the PACMAN Marie Curie action”, 20^th IMEKO TC4 International Symposium, Benevento, Italy, September 2014

G. Severino et al., “Calibrating the sensing-coil radius feed/down from a harmonic reference”, IMEKO 2014, Benevento, Italy, September 2014 

S. Sanfilippo et al., “Small-diameter rotating coils for field quality measurements in quadrupole magnets”, IMEKO 2014, Benevento, Italy, September 2014

D. Caiazza et al., “Challenges in measuring the longitudinal field profile of a magnet by a vibrating wire”, 20th IMEKO TC4 International Symposium, Benevento, Italy, September 2014

S.W. Kamugasa, V. Vlachakis, “PACMAN study of FSI and micro-triangulation for the pre-alignment of CLIC”, International Workshop on Accelerator Alignment 2014, Beijing, China, October 2014

C. Sanz et al., “New potential for the Leitz Infinity coordinate Measuring Machine”, EUSPEN 15^th International conference and Exhibition, Leuven, Belgium, June 2015

S. Zorzetti et al., “Design of the 15 GHz BPM test bench for the CLIC test facility to perform precise stretched-wire RF measurements”, July 2015, IOP Science, Measurement science & technology, Volume 26, number 9

N. Galindo Munoz et al., “Electromagnetic field alignment of the Compact Linear Collider (CLIC) accelerating structure with help of Wakefield monitor signals”, International Beam Instrumentation Conference IBIC2015, Melbourne, Australia, September 2015

C. Sanz et al., "Characterization and measurement to the sub-micron scale of a reference wire position", CIM 2015, Paris, France, September 2015

D. Caiazza et al., “Performance of the stretched and vibrating wire techniques and correction of background fields in locating quadrupole magnetic axes”, 21st IMEKO World Congress, Prague, Czech Republic, September 2015

S. Zorzetti et al., “Stretched-wire techniques and measurements for the alignment of a 15 GHz RF-BPM for CLIC”, International Beam Instrumentation Conference IBIC2015, Melbourne, Australia, September 2015

H. Mainaud Durand et al., "Status of PACMAN project", IBIC 2015, Melbourne, Australia, September 2015

S.W. Kamugasa, “Development of an absolute FSI network for CLIC component micrometric pre-alignment”, European Portable Metrology Conference, EPMC2015, Manchester, UK, November 2015

V. Vlachakis, “Upgrade and adaptation of micro-triangulation method & QDaedalus measurement system for the pre-alignment of CLIC components”, European Portable Metrology Conference, EPMC2015, Manchester, UK, November 2015

G. Severino et al., “Performance analysis of miniaturized PCB coils for small-aperture magnet qualification”, IEEE Sensors Conference 2015, Busan, South Korea, November 2015

D. Caiazza et al., “Uncertainty analysis of a vibrating-wire system for magnetic axes localization”, 9^th International Conference on Sensing Technology, Auckland, New-Zealand, December 2015

G. Severino et al., “Rotating-coil calibration in a reference quadrupole considering roll-angle misalignment and higher-order harmonics”, Measurement Journal, vol. 87, 74-82, March 2016

P. Arpaia et al., "Sensors applications within the research framework of the PACMAN Project on metrology for particle accelerators at CERN", IEEE 2016 Sensors Application Symposium, Catania, Italia, April 2016

H. Mainaud Durand et al., "PACMAN Project: A New Solution for the High-accuracy Alignment of Accelerator Components", 7th International Particle Accelerator Conference, Busan, Korea, May 2016

N. Galindo Munoz et al., "Pre-alignment of Accelerating Structures for Compact Acceleration and High Gradient using In-situ Radiofrequency Methods", 7th International Particle Accelerator Conference, Busan, Korea, May 2016

C. Sanz et al., “A Rotary Mount for Positioning a Stretched Wire Axis Within a Coordinate Measurement Machine”, 14^th International Workshop on Accelerator Alignment (IWAA 2016), Grenoble, France, October 2016

I. Doytchinov, “A Stochastic Approach in Uncertainty Budgeting for Accelerator Pre-Alignment-Study for the CLIC Project”, 14^th International Workshop on Accelerator Alignment (IWAA 2016), Grenoble, France, October 2016

V. Vlachakis, “Recent development of micro-triangulation for magnet fiducialisation”, Report, December 2016

S.W. Kamugasa et al., “Frequency scanning interferometry for CLIC component fiducialisation”, Report, December 2016

H. Mainaud Durand et al., Fiducialisation and initial alignment of CLIC component with micrometric accuracy, Report, December 2016